Replacement sponge for Universal Absorbing Roller (with adhesive)
€135.00
Available, delivery time: 1-3 days
Product information "Replacement sponge for Universal Absorbing Roller (with adhesive)"
Suitable for Universal Absorbing Roller Special:
Sponge dimensions: 120 x 58 x 3 cmPlease click here -> assembly instructions
Login
Accessory Items
The court dryer from our own productionWith the universal suction roller, the tennis court can be made playable again in a short time, regardless of whether after rain or heavy watering. The working width of approximately 59 cm allows for quick water absorption. The roller has an enormous intake capacity and is pressed out by an aluminum pressure roller. Excess water is then channeled through a PVC hose into a plastic collection tray with a capacity of about 20 liters. The drum body and housing are hot-dip galvanized with a foam cover. Easy handling is ensured by water absorption in both directions of movement. Two wing screws allow the roller to be adjusted slightly lower to press out the sponge more effectively. Suitable for all types of surfaces. To operate the roller a bit deeper, air can also be released from the tires. In case of wear, the suction drum or foam cover can be replaced. Technical data: Working width of the roller: approx. 59 cm Total width: approx. 90 cm Container capacity: approx. 20 l To prevent damage to the sponge of the suction roller, the following should be noted: The suction roller should not be exposed to the sun after use; it is best stored under cover. The roller for squeezing out the sponge should not be adjusted too tightly, as excessive pressure on the drum body can cause the sponge to tear. CAUTION – Color variations in the collection container are possible.
Accessory Items
For Universal Absorbing Roller