Very stable umbrella stand made of plastic, with rotatable support that can be adapted to different diameters. The stand can be filled with water or sand.
Dimensions: 45 x 46 cm
Seat shell - red for referee chair (old model) Model for Court Royal referee chairs manufactured before 2008. -> New model Seat shell dimensions: 46 x 36 x 41 cm Distance between the clamp holders at the front approx. 16.5 cm and between the plug-in connectors at the rear approx. 40 cm.
The Court Royal seat shell is the suitable replacement seat for referee chairs of the ROYAL DELUXE, Badminton referee chair, and ROYAL TURNIER series (models manufactured from 2007 onwards). It is made from high-quality, UV-resistant plastic and is specifically designed for long-term use on sports facilities both indoors and outdoors.
The durable seat shell is available in five different colors and can be quickly and easily installed or replaced thanks to its practical plug-in mounting system. This makes it an ideal and long-lasting replacement part for heavily used referee chairs.
With dimensions of W 35 x D 40 x H 40 cm, the seat shell provides a comfortable seating surface for referees.
Suitable for the benches Cologne, Berlin, Freiburg, and
the Freiburg advertising bench
The new aluminum umbrella holder brings shade to your tennis
court bench. To avoid health risks, it is important to ensure sufficient UV
protection. This holder therefore provides the ideal solution for protecting
yourself from the sun. Installation is extremely easy using the existing screws
on the backrest, allowing the holder to be retrofitted at any time as needed.
No additional screws are required. The inner tube diameter is approx. 26 mm,
making it perfectly suitable for umbrellas with a standard tube diameter of 25
mm. Suitable for the benches Cologne, Freiburg, Freiburg advertising bench,
and Berlin. Delivery does not include the umbrella.
Technical data:
Ø –
Inner tube: approx. 26 mm
Holder
width: approx. 13 cm
Holder
length: approx. 17 cm
Weight:
approx. 245 g
The umbrella holder, specially made for the Grand Slam
advertising bench, is made of white, plastic-coated aluminum. For optimal
stability, the holder is equipped with three screw holes. The included screw
set consists of three self-tapping mounting screws with sealing washers. These
can be easily mounted to the bench legs using a cordless screwdriver. The inner
tube diameter is approx. 26 mm, making it ideally suited for umbrellas with a
standard tube diameter of 25 mm. Delivery does not include the sunshade.
Technical data:
Ø –
Inner tube: approx. 26 mm
Weight:
approx. 360 g
Holder
length: approx. 29.5 cm
Holder
width: approx. 13 cm
Screws:
6.3 × 30 mm hex head with sealing washer
Very solid, tiltable parasol, 150 cm diameter with a quick release device. 8 pieces, made of 100% polyester fabric, approx. 160g/qm, weatherproof. Fits the umbrella holder for plastic benches as well as the Robusto umbrella stand.
Color: red, green and blue
